Sometimes, using hot rolled steel in a project isn't feasible, yet the client insists on using galvanized steel for building the house structure. In this project, 2 and 3 millimeter galvanized steel have been used to construct load-bearing frames. These profiles are formed to the required dimensions using a bending machine and then screwed together according to the provided drawings . With this method, there's no need for welding, painting, or cutting at the installation site, enabling the entire project to be completed quickly and efficiently in a very short timeframe.
Title :
Location :
Area :
Bedroom :
Bathroom :
JOSIPA
Croatia
160 m2
3
2
Heavy Steel :
Roll Former Machine :
Longest Member :
Time to Design :
No
Dahezb
8.00 m
3 Days
Designing Code :
Characteristic Value of Snow Load :
Fundamental Basic Wind Velocity :
Basic Velocity Pressure :
Reference Value of Peak Ground Acceleration :
IBC 2021
1.50 kN/m2
30.00 m/s
0.60 kN/m2
0.20 m/s2
Leave a message if you have similar project and need to design.